System Configuration 4-43

How to Clear Passwords

1.Power off NEC Express5800/ft series and unplug the both power cords.

2.Remove the both PCI modules (#1 and #2) from the NEC Express5800/ft series (see page 8-29 “Removing PCI Module”).

3.Open the top cover of the PCI Module #1.

4.Make setting of jumper switch for clearing the password.

Remove the clips from the jumper pins 11-12 and place them on the jumper pins 3-4 on the PCI Module #1.

5.Mount the PCI Module #1 to NEC Express5800/ft series (see page 8-31 “Installing PCI Module”).

6.Plug the both power cords and when the POWER Switch LED turns on, press it to power on NEC Express5800/ft series.

7.When the following POST screen appears after the startup, press the POWER Switch to turn off the power.

8.Unplug the both power cords.

9.Remove PCI Module #1 from NEC Express5800/ft series (see page 8-29 “Removing PCI Module”).

10.Reset the jumper switch setting.

Remove the clips from the jumper pins 3-4 and place them on the jumper pins 11-12 on the PCI Module #1.

TIPS: If you place it on other pins, the server may malfunction.