5-4 Installing and Using Utilities

NEC EXPRESSBUILDER Top Menu

The NEC EXPRESSBUILDER top menu is used for the setup of hardware and the setup and installation of OS.

Start

Start the NEC EXPRESSBUILDER top menu following the procedure below:

1.Turn on the powers of peripherals and the power of the server in this order.

2.Insert the NEC EXPRESSBUILDER CD-ROM into the CD-ROM drive of the server.

3.After the CD-ROM is inserted, reset the system (by pressing Ctrl + Alt + Delete) or turn off the power and then on again to restart the server.

The system is activated from the CD-ROM to start the NEC EXPRESSBUILDER.

After the NEC EXPRESSBUILDER is started, the NEC EXPRESSBUILDER top menu shown below appears.

A1

B

C

D

ASetup

Performs various automatic setup operations including settings of internal parameters and states of hardware and installations of Windows Server 2003, Enterprise Edition and several utilities. Select this setup procedure if hard disks are used in a partition different from that defined at the purchase, or if OS is reinstalled.

BTools

Starts each of the utilities stored in the NEC EXPRESSBUILDER individually to allow the operator to provide setup. Enables the setup without influence of installed OS.

CHelp

Describes the NEC EXPRESSBUILDER. We recommend you to read through the help before the setup.

DExit

The NEC EXPRESSBUILDER termination screen appears.