System Upgrade 8-47

N8104-84 1000BASE-SX Adapter

Consult your sales personnel for details when purchasing this hardware.

IMPORTANT: Note the following about this product:

It is advisable to add this product to such environment that each system is used for a different purpose (ex. system line, maintenance, monitoring) and multiple accesses do not occur simultaneously.

If there are multiple accesses, the processing power and transmission speed may be somewhat affected.

Slots to install the board

 

 

 

 

 

PCI slot

 

 

 

N code

 

Name

Group 1

Group 2

Remarks

 

 

 

#1

#2

#3

#1

#2

#3

 

N8104-84

1000BASE-SX Adapter

–

√

√

–

√

√

Each PCI module

 

 

 

 

 

 

 

 

 

can contain one

 

 

 

 

 

 

 

 

 

board only.

√: Can be installed.

–: Cannot be installed.

 

 

 

 

 

Installation of driver

The NEC Express5800/ft series uses a pair of N8104-84 boards in duplex mode.

After installing the drivers in the following procedure, perform a dual configuration setup.

IMPORTANT: Please use the CD-ROM for NEC Express5800/ft series for installation. If you use the floppy disk provided with the network card, it will not operate properly. (PROSetII will not start.)

TIPS: To perform this procedure, you have to log on the system as an Administrator or a member of the Administrators group.

After installing the OS, follow the steps below to install a driver and establish a dual configuration:

1.Mount the N8104-84 adapter to the slot with the same number in PCI module #1 and #2, and then start the Windows Server 2003, Enterprise Edition.

After starting Windows Server 2003, Enterprise Edition, the drivers are installed automatically.

IMPORTANT: If the [Digital Signature Not Found] dialog box appears, click the [Yes] button.