3-22 Windows Setup and Operation

Removing duplex configuration of RDR disks

This section describes how to remove duplex configuration from the disk with RDR setting.

In the example below, the duplication setting of the disks in the Slot 2 of the PCI modules for Group 1 and for Group 2 is removed.

IMPORTANT:

After executing the command, RDR settings will be cancelled but other data will remain. You cannot break the duplex setting of the following disks:

￿Disk containing the boot partition or volume

￿Disk containing page files

￿Dynamic disk

The display of RDR Utility is not updated automatically. Therefore, update it by clicking [Refresh] from [Action] or pressing F5 on the menu after performing operations described below.

1.Start the RDR Utility, right-click a disk you want to cancel RDR from the tree in the left pane, and select [Delete RDR configuration on Physical Disk].

2.In the [Warning] dialog box, click [Yes].