General Description
PCI Board Slot Status LEDs (P1, P2, P3)
To show the status of PCI board slots, each PCI module has three status LEDs.
LED | Description | Action | |
indications | |||
|
| ||
Off | PCI board is mounted | The system operates normally. | |
| correctly and operates |
| |
| in duplex mode. |
| |
| The PCI board is not | If the PCI board is not mounted or is mounted | |
| mounted; is mounted | incorrectly, just mount it correctly; there is no problem. | |
| incorrectly; or power | Check the condition of power unit. | |
| is not supplied. | If the problem persists, contact your sales agent. | |
Amber | PCI board is mounted | Simplex mode is not a problem. | |
| correctly and operates | To make the server | |
| in simplex mode. | to a slot of the same on the other PCI module. | |
Red | Although the PCI | Remount the PCI board correctly. | |
| board is mounted, it | Remount the PCI module correctly. | |
| may be offline or not | If the problem persists, contact your sales agent. | |
| be working. |
|
For LED indications when option boards are attached, see “PCI Module” in Chapter 8.
Disk LED
A DISK LED shows the status of a hard disk that is mounted in a slot of the
PCI | PCI | Description |
|
|
| Action |
module 1 | module 2 |
|
|
| ||
|
|
|
|
| ||
Green/Off* | Green/Off* | The hard disk drives are mirrored | - | |||
|
| and operating normally. |
|
| ||
Green/Off* | Amber | Mirroring the DISKs by the RDR | Wait for the mirroring to be | |||
|
| function. |
|
|
| completed. |
Green | Amber | Some trouble occurred on a hard | Reconfigure the hard disk mirror. | |||
|
| disk of the PCI module 1. |
| (See “DISK OPERATIONS” in | ||
|
| The hard disk drive in the PCI | Chapter 3, Windows Setup and | |||
|
| module 2 is running without | Operation) | |||
|
| mirror. |
|
|
| If the problem persists, contact |
|
|
|
|
|
| your sales agent. |
Amber | Green/Off* | Mirroring the DISKs by the RDR | Wait for the mirroring to be | |||
|
| function. |
|
|
| completed. |
Amber | Green | Some trouble occurred on a hard | Reconfigure the hard disk mirror. | |||
|
| disk of the PCI module 2. |
| (See “DISK OPERATIONS” in | ||
|
| The hard disk drive in the PCI | Chapter 3, Windows Setup and | |||
|
| module 1 is running without | Operation) | |||
|
| mirror. |
|
|
| If the problem persists, contact |
|
|
|
|
|
| your sales agent. |
Amber | Amber | Mirroring | DISK | by | Disk | Wait until the mirroring is finished. |
|
| Management. |
|
|
| |
* The DISK LEDs becomes off (blinks) when the hard disk drive is accessed.