5-50 Installing and Using Utilities

Procedure in the ft server utility

Start

1.Select the target component by using the ft server utility.

2.Check the current state of the target component with the LEDs.

3.Click the [Up] button of the target component. A certain time is required for the start.

The start result can be confirmed by the LEDs on the target component. The result of the start operation is registered in the event log.

Stop

Stop before replacing components.

1.Select the target component by using the ft server utility.

2.Check the current state of the target component with the LEDs.

3.Click the [Down] button of the target component. A certain time is required for the start.

The start result can be confirmed by the LEDs on the target component. The result of the start operation is registered in the event log.

Sample screen of ft server utility