CHECK THE DUPLICATING OPERATION OF MODULES
This section describes how to check if the system runs properly after system installation or reinstallation.
Evaluate Startup and Stop of PCI Modules
This section describes how to confirm the continuous system operation by failover after stopping the primary PCI module.
1.Check which is the primary PCI module.
The PCI module with the POWER switch illuminated is the primary module.
2.Check whether the PCI modules are duplicated.
To check if the PCI modules are duplicated, see the PCI modules’ status LEDs.
[Indications of the status LEDs when PCI modules are duplicated]
| LED | Primary | Secondary |
1 | BMC status LED | Green | - |
2 | PCI module status LED1 | - | - |
3 | PCI module status LED2 | Green | Green |
4 | DISK ACCESS LED | Green or off | Green or off |
DISK LED | Green | Green | |
*The numbers in the table correspond to the numbers in the above figure. The DISK ACCESS LED (4) lights when the hard disk drive is accessed.