1.Mount the
After starting Windows Server 2003, Enterprise Edition, the drivers are installed automatically.
IMPORTANT: If the [Digital Signature Not Found] dialog box appears, click the [Yes] button.
2.Build a dual LAN configuration. (See "Setting Dual LAN Configuration" in the separate volume “User’s Guide (Setup).”)
IMPORTANT:
You can also select [Load Balancing] in step 3 in "Setting Dual LAN Configuration". In this case, [Team #1:Adaptive Load Balancing Mode] is added to Network Component Tree.
Moreover, select [Stratus
If you build a dual configuration by using two pairs of adapters in Step 5, add an adapter in the same way.
PCI Board Status LED Indications
LED | Description | Action | |
indications | |||
|
| ||
Amber | Duplex is specified, however, | Specify duplex (AFT, ALB). | |
| the server works in simplex | Specify an appropriate driver. | |
| mode. |
| |
Off | PCI board is properly installed | In | |
| and operates in | occurs. | |
| mode (AFT, ALB). (Does not |
| |
| depend on simplex or duplex.) |
| |
| PCI board is installed to operate | The system is operating normally in duplex | |
| in the duplex mode. | mode. | |
| The PCI board is not installed | Mount the PCI board correctly. | |
| yet, the PCI board is installed | If the PCI board was not mounted, there is no | |
| incorrectly, or the power is not | problem. | |
| supplied. | Check the condition of power unit. | |
|
| Remount the PCI module. | |
Red | In the process of configuring or | Wait for a while until the indication changes. If | |
| canceling the duplex mode. | the indication unchanged, check the PCI board | |
|
| slot status using NEC ESMPRO Manager. | |
| Although the PCI board is | Make the slot of the board installed from NEC | |
| mounted, it may be offline or not | ESMPRO Manager online. | |
| be working. | Mount the PCI board correctly. | |
|
|
|