Follow the procedure below to install the DIMM. Make sure to power off the server before starting installation except when replacing DIMM.
1.Shutdown OS.
The system turns off automatically.
2.Disconnect power cord from outlet.
3.Remove the CPU module.
4.Check to be sure in which socket you are mounting the DIMM.
5.Remove the connector cover from the socket.
A DIMM connector cover is installed to the open socket. When the levers on both ends of the connector are opened, the DIMM connector cover is unlocked and you can remove the cover.
IMPORTANT: Carefully keep the removed DIMM connector cover.
6.Insert a DIMM into the DIMM socket straight.
TIPS: Pay attention to the orientation of the DIMM. The terminal of the DIMM has a cutout to prevent misinsertion.
After the DIMM is completely inserted into the socket, the levers are automatically closed.
7.Mount the CPU module.
8.Connect the power cords.
9.Press POWER switch to power on the module.
10.Verify that POST displays no error messages.
If POST displays an error message, take a note on the massage and see the POST error messages listed in Chapter 7.
11.After starting the OS, set the paging file size to at least the recommended value (1.5 times the installed memory size).