System Configuration 4-11

Advanced

Select "Advanced" on the Advanced menu to display the following screen.

Phoenix BIOS Setup Utility

 

 

Advanced

 

 

 

 

 

 

 

Advanced

 

 

Item Specific Help

 

 

 

 

 

 

 

 

 

 

 

 

Display the diagnostic

 

 

 

 

 

 

 

screen during POST

 

 

Boot-time Diagnostic Screen:

[Disabled]

 

instead of the Logo.

 

 

RomPilot Support:

[Disabled]

 

The boot-time diagnostic

 

 

 

screen is redirection

 

 

POST Error Pause:

[Enabled]

 

 

 

 

or rompilot is enabled.

 

 

 

 

 

 

 

 

 

 

 

 

 

Select Item

 

 

 

 

 

 

 

Select Menu

 

 

 

 

 

 

 

 

 

 

F1 Help

 

 

 

 

 

Select Item

-/+

Change Values

F9 Setup Defaults

Esc Exit

 

 

 

 

 

Select Menu

Enter Select

Sub-Menu

F10 Save Changes & Exit

 

 

 

 

See the table below for setup options on the screen.

Option

Parameter

Description

Your Setting

Boot-time

[Disabled]

Specify whether to display the Power On

 

 

Diagnostic Screen

Enabled

Self-Test (POST) screen at start-up. If

 

 

 

 

"Disabled" is selected, the NEC logo

 

 

 

 

appears while POST is in progress. (To

 

 

 

 

display POST check results, press Esc.)

 

 

 

 

If "RomPilot Support" is set to "Enabled" or

 

 

 

 

"Console Redirection" is set, this option is

 

 

 

 

unconditionally set to "Enabled".

 

 

RomPilot Support

[Disabled]

Enable or disable the RomPilot (the remote

 

 

 

Enabled

console and remote drive features during

 

 

 

 

OS start-up). If this option is set to

 

 

 

 

"Enabled", "Boot-time Diagnostic Screen" is

 

 

 

 

unconditionally set to "Enabled".

 

 

Post Error Pause

[Enabled]

Specify whether to stop POST at the end of

 

 

 

Disabled

POST when an error occurs during POST.

 

 

 

 

[

]: Factory-set

 

TIPS: "RomPilot" is a BIOS feature for communications with the NEC Management Workstation Application (NEC MWA). To use the NEC MWA for management of the server, select "Enabled" for "RomPilot Support.” Use of the RomPilot features requires setups for the NEC MWA.