Troubleshooting 7-35

“Source: iANSMiniport

Event ID: 11

Description: Adapter link down: Stratus emb-82544GC Copper Gigabit Adapter #2.”

“Source: iANSMiniport

Event ID: 13

Description: Secondary Adapter is deactivated from the Team: Stratus emb-82544GC Copper Gigabit Adapter #2.”

“Source: iANSMiniport

Event ID: 16

Description: Team #X: The last adapter has lost link. Network connection has been lost.”

“Source: iANSMiniport

Event ID: 35

Description: Initializing Team #X missing adapters. Check the configuration to verify that all the adapters are present and functioning.”

If the following logs are recorded after the above logs are recorded, there is no real problem on operation by the above errors or warnings. When the following logs are not recorded, if the log of the source “sragbe” is not recorded, there is no real problem on operation by the above errors or warnings.

“Source: iANSMiniport

Event ID: 14

Description: Secondary Adapter has rejoined the Team: Stratus emb-82544GC

 

Copper Gigabit Adapter.”

“Source:

iANSMiniport

Event ID:

15

Description:

Adapter link up: Stratus emb-82544GC Copper Gigabit Adapter.”

“Source:

iANSMiniport

Event ID:

17

Description: Team #X: An adapter has re-established link. Network connection has been restored.”

ESMCpuPerf-related logs are recorded in the system event log:

→If NEC ESMPRO Agent cannot get performance information from the OS due to a temporary resource shortage or high load ratio on the system, it will record the following event log. However, there is no real problem on operation (In the description, Y and Xrepresent alphanumeric characters).

Source: ESMCpuPerf

Event ID: 9005

Description: Cannot get system performance information now (YYYY Code=xxxx).

If NEC ESMPRO Agent cannot get information, it will treat the load ratio as 0%. So, if NEC ESMPRO Agent cannot get information continuously, the CPU load ratio may appear lower than the actual value.