Windows Setup and Operation 3-5

Configuring and Breaking Mirror

This section describes the procedures to configure and break the mirror of hard disk volumes using Disk Management.

Configuring mirror

Follow the procedures below to configure a volume mirror.

IMPORTANT:

Set mirror to the disks whose Target IDs are identical.

For details, see “Hard Disk Configurations that can be built on the NEC Express5800/ft series (page 3-3).”

1.Click [Start] - [Administrative Tools] then [Computer Management]. The [Computer Management] dialog box will appear.

2.Click [Disk Management] under [Storage] in the console tree. The [Disk Management] window will appear on the right panel.

3.Insert a new disk. The disk will appear on the [Disk Management] window.

IMPORTANT:

If the status of the disk is “Not Initialized”, right-click the disk and initialize it. If [Foreign] appears, right-click the disk and execute [Convert to Basic Disk…].