Installing and Using Utilities 5-73

Refresh of View based on State Change Alert Setting

A new function is supported so that NEC ESMPRO Manager window will be updated on a system state change basis (in other words, whenever necessary). This function is OFF by default. See the [Setting] below about how to turn it ON.

NEC ESMPRO Manager window is updated by one minute-interval polling by default. Therefore, there is some time-lag for NEC ESMPRO Manager to recognize changes in NEC Agent. By using this function, the time-lag can be reduced. However, it may consume a little bit more network band width since each state change will be notified to NEC ESMPRO Manager as some kind of alert.

[Setting]

1.Select [All Programs] → [Esmpro] from the start menu and click [Manager Settings].

[Manager Settings] dialog box

2.Check [Enable the State Change Alert Setting].

3.Click the [Agent Setting...] button.

[State Change Alert Setting] dialog box

4.Check the name of servers sending the state change alert to the Manager when the Agent recognizes changes in the state.

Click the [Execute] button for the setting change to take effect.