System Upgrade 8-37

10.In the case of a long board, slide the bracket to fasten the other edge of the board.

Screw

Bends for fastening boards

11.Install the top cover to the PCI module.

12.Install the PCI module.

Do not close the release levers yet.

13.Connect the network cable and option cables.

14.Close the release levers.

The installed PCI module will start automatically.

15.Secure the release levers with the setscrews.

16.Check the PCI module status LED and PCI board status LED.

For description of LED indications, see “LEDs” in Chapter 2 and “Setup of Optional PCI Board” later in this chapter.