Windows Setup and Operation 3-43

Removing dual LAN

TIPS: To set dual LAN configuration, log on as "Administrator" or a member of the group "Administrators".

1.Display the [Intel(R)PROSet II] dialog box.

2.Start one of the start menu modes below:

Standard start menu mode

Click [Intel(R)PROSet II] in [Control Panel] from the [Start] menu.

Classic start menu mode

(1)Select [Control Panel] from [Settings] of the [Start] menu.

(2)Double-click the [Intel(R)PROSet II] icon.

3.Remove all adapters from Duplication.

Right-click the following adapters on the control tree which is located on the left side of the [Intel(R)PROSet II] dialog box and select [Remove from Team].

<For on-board >

-Status emb-82559 10/100 Enet Adapter

-Status emb-82544GC Copper Gigabit Adapter

<For option board >

-Status AA-U51500 10/100 Enet Adapter (100BASE-TX)

-Status AA-U57000 Fiber Gigabit Adapter (1000 BASE-SX)

-NEC 8490 XT Copper Gigabit Adapter (1000 BASE-T)

You will then see the dialog box on the right of this paragraph. This is because one of two teamed adapters constituting dual configuration is removed.

Click [Yes], to remove the adapter from Team.