3-16 Windows Setup and Operation

5.The disks which RDR has been set can only be used in the system with the ft control software ver.3.0 or later.

6.If the system is shut down (or restarted) while the mirror is broken, or a long time (30 hours or longer) has passed after the mirror is broken, the mirror resynchronization target will be the entire disk.

For example, if the mirroring has been broken due to a PCI module failure, when you shut down the system and replace the PCI module in such a state, the entire area of the disk needs to be resynchronized.

7.You must insert a new disk or replace a disk while the server is powered on.

8.Import of disk is not supported.

When reinstalling the OS, if necessary, perform physical format on all disks after backing up data disk.

After reinstalling the OS, restore data from the backup.

Configuring and Removing Duplexed Setting of Disks by the RDR Function

This section describes how to make disks duplex and how to remove the settings by using the RDR function. To use the RDR function, use [RDR Utility].

About RDR Utility

Starting RDR Utility

From [Start], select [All Programs] then [RDR] and click [RDR Utility] to start [RDR Utility].

Screen

Note: In RDR Utility, the PCI module names correspond to the following modules: PCI module 1: PCI module (for Group1)