IMPORTANT:
User password setup is not available before Supervisor password setup.
Do not set any password before installing the OS.
See the table below for setup options on the screen.
Option | Parameter | Description | Your Setting |
Supervisor | [Clear] | Indicates Supervisor password setup status (view |
|
Password is | Set | only). |
|
User Password | [Clear] | Indicates User password setup status (view only). |
|
is | Set |
|
|
Set Supervisor | Up to 7 | Press Enter to display the supervisor password |
|
Password | alphanumeric | entry screen. With the supervisor password, all |
|
| characters | SETUP menus are available for access. This |
|
|
| option is available only when you log into the |
|
|
| SETUP utility with the supervisor password. |
|
Set User | Up to 7 | Press Enter to display the user password entry |
|
Password | alphanumeric | screen. With a user password, accessing the |
|
| characters | SETUP menus is restricted. This option is |
|
|
| available only if the Supervisor Password is |
|
|
| specified. |
|
Password on | Enabled | Specify whether to request a password entry at |
|
boot | [Disabled] |
| |
|
| beforehand. When the supervisor password is |
|
|
| specified and this option is disabled, the BIOS |
|
|
| assumes that a system boot attempt is made by a |
|
|
| user. |
|
Power Switch | [Unmasked] | Enable or disable the POWER switch on the |
|
Mask | Masked | server. If "Masked" is selected, |
|
|
| POWER switch becomes unavailable after OS |
|
|
|
| |
|
| unavailable. Forced shut down is a feature to shut |
|
|
| down by pressing the POWER switch for over |
|
|
| four seconds.) |
|
Option ROM | [Unmasked] | Enable or disable key entries during optional |
|
Menu Mask | Masked | ROM expansion. |
|
|
| [ | ]: |