Installing and Using Utilities 5-77

9.Right-click the server name to open the pop-up menu and select [Open Remote Console] to open [MWA Remote Console].

10.Select the [Action at Remote Console Connect] command from the popup menu displayed by right-clicking the server window to display the [Action at Remote Console Connect] dialog box. Then select [Go MWA mode].

11.Insert NEC EXPRESSBUILDER CD-ROM into the drive of the computer to be managed and insert floppy disk storing the configuration information (CSL_LESS.CFG) into the FDD drive.

12.Hook up the management PC to LAN.

13.Power off and on the main unit to reboot the system.

After one reboot, the main menu will appear on the management PC’s screen, on which you can perform hardware setup and run utilities.

TIPS: If the configuration information (CSL_LESS.CFG) in the FD has already been loaded, the main menu will appear without a reboot.

14.When the main menu appears on the management PC’s screen, eject the floppy disk.

15.If you use other tools, exit NEC EXPRESSBUILDER and power off/on the main unit.

IMPORTANT: After completing the procedure for remote console connection, uncheck [Reset] of [Activate] in [Property] dialog box.