System Configuration 4-5

Configuration Examples

The following describes examples of configuration required to use software-link features or for system operations.

Link with Management Software

To control power supply of the server with NEC ESMPRO Manager via the network

Select [System Hardware] → [AC-LINK] → [StayOff].

To use the management PC with "NEC MWA" installed for remote operations

Remote operation via LAN

Select [Advanced] → [Advanced] → [RomPilot Support] → [Enabled]. Remote operation via direct connection using cross cable

Select [System Hardware] → [Console Redirection] → [Console Connection] → [Direct]. Remote operation via WAN

Select [System Hardware] → [Console Redirection] → [Console Connection] → [Via Modem].

UPS

To link power supply with the UPS

To power on the server when power is supplied from the UPS Select [System Hardware] → [AC-LINK] → [Power On].

To keep the server off-powered even when power is supplied from the UPS if the POWER switch was used to power off

Select [System Hardware] → [AC-LINK] → [Last State].

To keep the server off-powered even when power is supplied from the UPS Select [System Hardware] → [AC-LINK] → [StayOff].

Keyboard

To set NumLock and key repeat

Select [Advanced] → [Keyboard Features] and set each item.