Windows Setup and Operation 3-25

Other functions of RDR Utility

<Commands for physical disks>

Remove Physical Disk from RDR Virtual Disk

All data including RDR settings on a physical disk can be deleted.

IMPORTANT:

After executing the command, the physical disk becomes an empty basic disk without RDR settings.

This command can only be executed to physical disks in Duplex/Syncing state.

1.Start RDR Utility and right-click a target disk on the tree in the left pane, and click [Remove Physical Disk from RDR Virtual Disk].

2.In the [Warning] dialog box, click [Yes].

3.In the [Success] dialog box, click [OK].

Clear MTBF

When a failure occurs to a disk, the mean time between failures (MTBF) is counted and the value is saved. In RDR Utility, the value is displayed at [MTBF: Current] and [MtbfThresholdStatus].

These MTBF values can be cleared by the [Clear MTBF] command.

1.Start RDR Utility and right-click a target disk on the tree in the left pane, and click [Clear MTBF].

2.In the [Success] dialog box, click [OK].