6.Select [System Diagnostics].
The system diagnosis starts and will be completed in approximately three minutes.
When the diagnosis is completed, the following appears on the screen of the display unit.
| System bar | Title bar |
|
|
|
Test window | CURSOR: Select Window | ENTER: View Window P: Log Out Q: Quit |
|
|
|
Target scope
System bar: | Shows information including time of progress during the diagnostics. Upon |
| completion of the diagnostics, descriptions on key operations to navigate |
| the window are shown. |
Title bar: | Shows items for diagnosis. If an error is detected, the bar is indicated in |
| red. |
Test window: Shows the progress or result of diagnostics.
Target scope: A cursor to select the test window. Use the cursor keys on the keyboard to move it to another test window. (Move the target scope to a desired window and press Enter. Now you can view detailed information on the selected window. To return to the previous window, press Enter once again.) Some system configurations do not display the target scope but change the color of test window’s frame.
If an error is detected during the system diagnostics, the title bar turns in red, and error information is displayed in red characters. Note down the error message and contact your sales agent.
7.Press Q and select [Reboot] from the menu.
The server restarts and the system is started from the NEC EXPRESSBUILDER.
8.Exit the NEC EXPRESSBUILDER, and remove the
9.Power off the server and unplug the power cord from the receptacle.
10.Reconnect all the LAN cables to the server.
11.Plug the power cord.
This completes the system diagnostics.