Nortel Networks NN43001-504 manual Procedure Configuring the network

156Appendix A WLAN Application Gateway 2246

Procedure 16

Configuring the network

Step Action

1From the NetLink OAI System screen, select Network Configuration.

2Enter the configuration information for the WLAN Application Gateway 2246, as provided by the network administrator.

•Ethernet Address—this is the MAC address of the WLAN Application Gateway 2246. This address is set at the factory.

•IP Address—enter the complete IP address for the WLAN Application Gateway 2246, including digits and periods. Do not use DHCP. The IP address can be changed after initial configuration.

•Hostname—the default host name can be changed. This is the name of the WLAN Application Gateway 2246 to which connection is made. This name is for identification purposes only. Spaces cannot be entered in this field.

•Subnet Mask—Enter the subnet mask defined by the network administrator.

•Default Router—DHCP or static IP address.

•Allow Telnet Connections—Enter Y (Yes) to allow connection to the WLAN Application Gateway 2246 through Telnet. Enter N (No) if no Telnet connection is allowed.

•Allow FTP Connections—Yes or No (NTTQ65xx models only).

•DNS server and DNS domain—these settings are used to configure Domain Name Services (DNS). (These settings can also be configured as DHCP. This causes the DHCP client in the WLAN Application Gateway 2246 to attempt to automatically obtain the correct configuration from the DHCP server. The DHCP setting is only valid when the IP address is also acquired using DHCP).

•WINS servers—these settings are used for Windows Internet Name Services (WINS). (These settings can also be configured as DHCP. This causes the DHCP client in the WLAN Application Gateway 2246 to attempt to automatically obtain the correct setting from the DHCP server. The DHCP setting is only valid when the IP address is also acquired using DHCP.) When WINS is configured properly, the WLAN Application Gateway 2246 can translate hostnames to IP addresses. When using Telnet, it is

Nortel Communication Server 1000

WLAN IP Telephony Installation and Commissioning

NN43001-504 01.02 Standard

Release 5.0 15 June 2007

Copyright © 2004-2007, Nortel Networks