Nortel Networks NN43001-504 manual Wlan IP Telephony Manager 2245 configuration

104WLAN IP Telephony Manager 2245 configuration

Fore more information about the master WLAN IP Telephony Manager 2245, see "Master WLAN IP Telephony Manager 2245" (page 60).

•Hostname:—optional field. Change the default hostname of this WLAN IP Telephony Manager 2245, if desired. Hostname is for identification purposes only.

Note: Spaces cannot be entered in this field.

•Subnet mask—the subnet mask of the subnet.

•Default Gateway—the default gateway for the subnet.

•SVP-II TFTP Download Master—the IP address of the TFTP Server where the software update files are saved. Enter one of the following:

—NONE—disables this function

—IP address of the TFTP Server that transfers software updates to the WLAN IP Telephony Manager 2245

•Primary DNS Server, Secondary DNS Server, DNS Domain—used to configure Domain Name Services (DNS). Obtain the settings from the network administrator. Optionally, enter DHCP. This enables the DHCP client in the WLAN IP Telephony Manager 2245 to attempt to automatically obtain a valid IP address from the DHCP Server. The DHCP setting is only valid when the IP address is obtained from DHCP.

•WINS Server—the IP address of the Windows Name Services (WINS) Server. Obtain the settings from the network administrator. Optionally, enter DHCP. This enables the DHCP client in the WLAN IP Telephony Manager 2245 to attempt to automatically obtain a valid IP address from the DHCP Server. The DHCP setting is only valid when the IP address is obtained from DHCP.

When WINS is configured, the WLAN IP Telephony Manager 2245 can translate hostnames to IP addresses. This means that when using Telnet, the WLAN IP Telephony Manager 2245 can be accessed using its hostname rather than its IP address.

•Workgroup—indicates whether a workgroup is configured in the WINS Server.

•Syslog Server—the IP address of the server where the system logs for the WLAN IP Telephony Manager 2245 are written. If a Syslog Server is configured, a message is sent to the Syslog Server when an alarm is generated. Enter one of the following:

—NONE—disables this function

—IP address of the Syslog Server

Nortel Communication Server 1000

WLAN IP Telephony Installation and Commissioning

NN43001-504 01.02 Standard

Release 5.0 15 June 2007

Copyright © 2004-2007, Nortel Networks