202Appendix B Troubleshooting WLAN IP Telephony installations

current security configuration

When Run Site Survey begins, it is in single SSID mode. Press the Any soft key to switch to all APs (regardless of SSID) mode; the Any soft key changes to MyID. The display looks like the following in multiple AP mode:

111111 -22 33

444

111111 -22 33

444

111111 -22 33

444

111111 -22 33

444

MyID

Detl

 

 

where

111111 = last three octets of the SSID for the discovered AP

22= signal strength of the specified AP

33= channel number of the specified AP

4444 = DTIM interval configured for the specified AP

MyID = soft key to toggle between single and any SSID mode Detl = soft key to toggle between summary and detail screens

The following display shows three APs configured with an SSID that matches that of the handset. The first has a signal strength of –28dBm, and is configured on channel 2 with a beacon interval of 100 ms. The second has a signal strength of –48dBm, and is configured on channel 6 with a beacon interval of 200 ms. The third has a signal strength of –56dBm and is configured on channel 11 with a beacon interval of 100 ms.

ab7bc8 -28 02

100

2ae578 -48 06

200

2ae596 -56 11

100

Any

Detl

 

 

Nortel Communication Server 1000

WLAN IP Telephony Installation and Commissioning

NN43001-504 01.02 Standard

Release 5.0 15 June 2007

Copyright © 2004-2007, Nortel Networks

Page 202
Image 202
Nortel Networks NN43001-504 manual Ab7bc8 -28 100 2ae578 -48 200 2ae596 -56 Any Detl