System status 165

Procedure 24

Viewing system status

Step Action

1From the NetLink OAI System screen, select the System Status Menu option.

2At the Systems Status Menu screen, select from the following options:

Application ActiveYesappears if the application is communicating correctly with the WLAN Application Gateway 2246. No appears if the application is not connected. This field is read-only and changes dynamically.

Error Status—The only application-specific error is No ECP heartbeat, which means the application failed to send a heartbeat to the WLAN Application Gateway 2246.

Network Status—information about the connection to the LAN. See "Network status" (page 165).

Software Versions—lists the software versions currently running on the WLAN Application Gateway 2246. See "Software versions" (page 166).

* Telephone Line Status—provides information about the functioning of each wireless handset registered to the WLAN Application Gateway 2246. See "Telephone line status" (page 167).

—End—

Network status

The WLAN Application Gateway 2246 is connected to the Ethernet network, referred to as the LAN. The information about this connection displayed on the Network Status screen.

The following information appears at the top of the screen:

Ethernet Address—MAC address of the WLAN Application Gateway 2246 (hexadecimal).

Stats Time Period—the length of time the statistics are accumulating in the Pkts and Bytes columns. This is either the system uptime, or the time that has elapsed since a user pressed C=Clear while viewing this display.

Nortel Communication Server 1000

WLAN IP Telephony Installation and Commissioning

NN43001-504 01.02 Standard

Release 5.0 15 June 2007

Copyright © 2004-2007, Nortel Networks

Page 165
Image 165
Nortel Networks NN43001-504 manual Network status, Procedure Viewing system status