Configuration 153

Bits per second: 9600

Data bits: 8

Parity: None

Stop bits: 1

Flow control: None

Note: If using Windows 2000, Service Pack 2 must be installed to enable the use of HyperTerminal™.

3Reset the system.

The following appears on the terminal display:

04830130

4Type the following command using the terminal or PC keyboard:

0255CC [CTRL M] [CTRL J]

The command does not display on the screen as it is typed.

The Login prompt appears. If an error is made when entering the command string, the message Ill Formed Packet appears. It appears as a series of numbers followed by some form of the typed command. If this occurs, repeat Step 3 and Step 4.

5Enter the default logon name and the default password:admin admin

admin admin

Note: The logon name and password are case-sensitive.

The NetLink OAI System screen appears. This screen, the main menu screen of the Administration Console, displays the factory-default name of the WLAN Application Gateway 2246 to which the serial port is connected

—End—

Next, configure the WLAN Application Gateway (including IP address) by following the steps in the "Task summary list" (page 154).

Configuration

The NetLink OAI System screen is the main menu of the Administration Console. Use this screen to configure the WLAN Application Gateway 2246.

Nortel Communication Server 1000

WLAN IP Telephony Installation and Commissioning

NN43001-504 01.02 Standard

Release 5.0 15 June 2007

Copyright © 2004-2007, Nortel Networks

Page 153
Image 153
Nortel Networks NN43001-504 manual Configuration, 04830130