Nortel Networks NN43001-504 manual Message Description Action

		Dropped calls 131
Message	Description	Action
Erase Failed	Download process failed to	Operation retries but can
	erase the memory in the	eventually report the error int.
	wireless handset.	error: 0F.
		Power cycle the wireless
		handset.
Erasing memory	The wireless handset has	None. When the progress bar
	determined that a download	fills the display line, the erase
	must occur and is erasing the	operation is complete.
	current software from memory.
		Note: Do not turn the handset
		off during this operation.
Error!	A fatal software error is	This message appears during
[error details]	detected. All handset operation	the Halt on Error mode. To
(For the WLAN Handset	is halted and any call is lost.	capture the error message,
6120/6140 only)		reboot the handset and write
		down the information that is on
		the display.
Files Too Big	The handset software	Download new software from
	download files are incorrect or	the Nortel site.
	corrupted.	See "Updating software" (page
		114).
Flash Config Error	Handset internal configuration	Perform the Restore
	is corrupt.	Defaults operation from
		the administrator menu and
		reprogram, or reprogram using
		the Configuration Cradle.
Initializing	The wireless handset is	None. This is informational
	performing a power-on	only.
	initialization.
Internal Err. # #	The wireless handset has	Record the error code so it can
	detected a fault from which it	be reported. Turn the wireless
	cannot recover.	handset off, and then on
		again. If the error persists, try
	OE=Error while writing the	registering a different wireless
		handset to this telephone port.
	Flash (return handset to
		If the error still persists, contact
	factory)
		Nortel Technical Support and
		report the error.
	OF = No functional code
	(contact Nortel Technical
	Support)

Nortel Communication Server 1000

WLAN IP Telephony Installation and Commissioning

NN43001-504 01.02 Standard

Release 5.0 15 June 2007

Copyright © 2004-2007, Nortel Networks