Configuration 155

4Select the Feature Programming option to configure the function sequence that activates the application. See "Programming a feature" (page 163).

—End—

Configuring the OAI Box

Follow the steps in Procedure 15 "Configure the system type from the OAI Box Configuration option" (page 155) to configure the system type.

Procedure 15

Configure the system type from the OAI Box Configuration option

Step Action

1From the NetLink OAI System screen, select OAI Box Configuration.

Note: This option does not appear unless Use NetLink GW with mogX00 is configured to Yes, which is the default.

2Enter the configuration information for the WLAN Application Gateway 2246 (provided by the network administrator).

Use NetLink GW with mogX00—change this option to No.

TFTP Download Master—enter the IP address of the TFTP Server.

Maintenance Lock—the system sets this option to Yes after maintenance activities are performed that require a reset. This option cannot be changed. It is automatically set. Reset the system at exit to clear Maintenance Lock. Maintenance Lock prevents any new calls from starting.

Reset System—if this option is set to Yes, the WLAN Application Gateway 2246 is reset after pressing ENTER.

Reset All Systems—not applicable.

3Press Esc on the keyboard to return to the NetLink OAI System screen.

—End—

Configuring network parameters

Follow the steps in Procedure 16 "Configuring the network" (page 156) to configure network parameters, including IP address.

Nortel Communication Server 1000

WLAN IP Telephony Installation and Commissioning

NN43001-504 01.02 Standard

Release 5.0 15 June 2007

Copyright © 2004-2007, Nortel Networks

Page 155
Image 155
Nortel Networks NN43001-504 manual Configuring the OAI Box, Configuring network parameters