Nortel Networks NN43001-504 manual Feature programming, Procedure Programming a feature

Continuing configuration through Telnet 163

2At the Telephone Line Configuration screen, select the field to use as the search key (MAC Address, Name, or Extension),

3Press S to display a search screen dialog box.

4Type an appropriate search string.

5Press Enter.

The success or failure of the search appears at the bottom of the screen.

6Continue to change the search string for different search criteria or exit by pressing the Esc key.

—End—

The first line of the Telephone Line Configuration or Telephone Line Status screen displays the line in which the search match is found.

Successful searches always have the first found match at the top of the list.

Note: Partial strings match the beginning of strings. For example, a search for extension 10 matches extensions 10, 100, 1000, and so on, but does not match 010.

Feature programming

The application function is accessed in the handset by pressing the FCN button plus a second button. The button used to access the application feature from the wireless handset is configured through the Feature Programming option.

Note: FCN 1-6 are hard-coded. If the application function is programmed to use FCN 1-6, the hard-coded function is overridden. Nortel recommends using 7, 8, or 9 for the application function.

Follow the steps in Procedure 22 "Programming a feature" (page 163) to program an application feature for the wireless handsets.

Procedure 22

Programming a feature

Step Action

1From the NetLink OAI System screen, select Feature Programming and press Enter.

2At the Feature Programming screen , use the arrow keys to select the function number 7, 8, or 9 to associate with the application.

Nortel Communication Server 1000

WLAN IP Telephony Installation and Commissioning

NN43001-504 01.02 Standard

Release 5.0 15 June 2007

Copyright © 2004-2007, Nortel Networks