Configuration 159

The WLAN Application Gateway 2246 uses the following pins on the connector.

Table 19

Pins on the connector

Pin

Function

 

 

1

Carrier Detect

 

 

2

Data OAI Receives

 

 

3

Data OAI Transmits

 

 

5

Ground

 

 

7

Ready to Send

 

 

8

Clear to Send

 

 

Connect to the Application Server through the LAN

The IP address must be configured for the WLAN Application Gateway 2246 to function on the LAN. Follow the application instructions to identify the WLAN Application Gateway 2246 to the application.

Figure 27

WLAN Application Gateway 2246 connection to Application Server through the LAN

Connect to Application Server through a modem

Connect the modem to the Gateway serial port using a cable that conforms to RS-232 standards for DTE-to-DCE connections. See Figure 28 "WLAN Application Gateway 2246 connection to Application Server through a modem" (page 160).

Nortel Communication Server 1000

WLAN IP Telephony Installation and Commissioning

NN43001-504 01.02 Standard

Release 5.0 15 June 2007

Copyright © 2004-2007, Nortel Networks

Page 159
Image 159
Nortel Networks NN43001-504 manual Connect to the Application Server through the LAN, Pins on the connector Function