WLAN specific configuration 181
ATTENTION
2.x code is not supported. Nortel recommends that sites upgrade to 3.2.116.21 code. Contact Nortel GNTS Technical support to obtain this
Specific Cisco configuration examples
Table 22 "1230 connected with 2950 and 2245 connected with 2950" (page
181)provides the steps to configure the Cisco Aironet 1230 connected with a Cisco Catalyst 2950, and the WLAN IP Telephony Manager 2245 connected with the Cisco Catalyst 2950.
Table 22
1230 connected with 2950 and 2245 connected with 2950
| AP: 1230 | 2950 connected the APs | 2950 connected to 2245 |
|
|
|
|
1 | mls qos map | mls qos map | |
| class_SVP_VoIP | 40 32 46 48 56 | 32 46 48 56 |
| match ip protocol 119 |
|
|
| (protocol 119 marked |
|
|
| the value of cos 5) |
|
|
|
|
|
|
2 | |||
| 0 | ||
| class class_SVP_VoIP | ||
|
| ||
|
| (dscp 40 and 47 by default are | |
|
| (dscp 40 and 47 by default are | marked as cos 5) |
|
| marked as cos 5) |
|
|
|
|
|
3 | int fastethernet 0.240 | int fastethernet 026 (the port | int fastethernet 03 (the port that |
| encapsulation dot1Q | that is connected with the AP) | connected with 2245) |
| 240 | switchport trunk native vlan 11 | switchport access vlan xx |
| wireless- | switchport trunk allowed vlan | switchport mode access |
|
| 11, 240 | mls qos trust cos |
|
| switchport mode trunk | mls qos cos 5 |
|
| mls qos trust cos | |
|
|
| |
|
|
|
|
4 | (for return path) dot11 |
| |
|
| match | |
|
|
|
|
5 |
|
| |
|
|
| 172.23.0.016 eq 5000 |
|
|
| 172.23.0.016 |
|
|
|
|
6 |
|
| |
|
|
| |
|
|
| |
|
|
|
|
Nortel Communication Server 1000
WLAN IP Telephony Installation and Commissioning
Release 5.0 15 June 2007