Nortel Networks NN43001-504 manual Save the configuration, Procedure Saving the configuration

Configure the network 105

•Maintenance Lock—indicates whether the WLAN IP Telephony Manager 2245 is in Maintenance Lock mode.

•Disable Telnet Service—indicates whether a Telnet session can access the WLAN IP Telephony Manager 2245. The available options are:

—Y—prevents a Telnet session from accessing the WLAN IP Telephony Manager 2245.

—N—allows a Telnet session to access the WLAN IP Telephony Manager 2245.

•Send/All—in a system with multiple WLAN IP Telephony Managers 2245, the SendAll option is provided to speed configuration and ensure identical settings. The S=SendAll option enables configuration parameters of the selected field to be sent to every WLAN IP Telephony Manager 2245 on the LAN. SendAll can only be used after the IP address is configured on each WLAN IP Telephony Manager 2245 using a serial connection. If identical configuration parameters are to be used for all WLAN IP Telephony Managers 2245, configure only the IP address and custom hostname (if desired) on each WLAN IP Telephony Manager 2245 using the initial serial connection. Then connect through the LAN to this WLAN IP Telephony Manager 2245 and use SendAll to transmit identical configuration options of each field for all WLAN IP Telephony Managers 2245.

ATTENTION

IMPORTANT!

If Send/All is used on the system, all passwords must be identical. Do not change the password at the initial configuration if the SendAll option is used. Use the default password and change it globally, if desired, after a LAN connection is established for all WLAN IP Telephony 2245 units.

If independent administration of each WLAN IP Telephony Manager 2245 is desired, the passwords can be set during initial configuration.

Save the configuration

Reset the WLAN IP Telephony Manager 2245 in order to save the configuration parameters. Follow the steps in Procedure 7 "Saving the configuration" (page 105) to save the configuration.

Procedure 7

Saving the configuration

Step Action

1Press Esc on the keyboard.

If the WLAN IP Telephony Manager 2245 is in Maintenance Lock, a prompt appears asking if the configuration is to be saved.

Nortel Communication Server 1000

WLAN IP Telephony Installation and Commissioning

NN43001-504 01.02 Standard

Release 5.0 15 June 2007

Copyright © 2004-2007, Nortel Networks