148Appendix A WLAN Application Gateway 2246

 

Maximum

Model number

number of users

 

 

NTTQ65CA

256

 

 

NTTQ65DA

512

 

 

NTTQ65EA

1024

 

 

NTTQ65FA

10000

 

 

In Figure 23 "WLAN Application Gateway 2246 connections" (page 148), a WLAN Application Gateway 2246 is connected to the site LAN through an Ethernet switch. The connection to the Application Server can be accomplished by a direct connection (RS-232) or through the Ethernet connection. Only one of these connections can be used at one time.

The IP address of the WLAN Application Gateway 2246 must be configured during initial configuration. After the IP address is established, the WLAN Application Gateway 2246 can be accessed by the Application Server through the RS-232 port or through the LAN using Telnet.

Figure 23

WLAN Application Gateway 2246 connections

System overview

At a typical site, the WLAN Application Gateway 2246 is connected to the Ethernet switch through an RJ-45CAT 5 cable. The Application Server is connected through the RS-232 port. The client’s system can include a LAN and its Application Server with a TAP connection to a communications device such as a paging controller.

Nortel Communication Server 1000

WLAN IP Telephony Installation and Commissioning

NN43001-504 01.02 Standard

Release 5.0 15 June 2007

Copyright © 2004-2007, Nortel Networks

Page 148
Image 148
Nortel Networks NN43001-504 manual System overview, Model number Number of users, Wlan Application Gateway 2246 connections