SMSC LAN9420, LAN9420i BITS, TYPE, DEFAULT, DESCRIPTION, EEPROM Loaded, EPC Address (EPC_ADDR)

Single-Chip Ethernet Controller with HP Auto-MDIX Support and PCI Interface

Datasheet

BITS	DESCRIPTION	TYPE	DEFAULT
8	EEPROM Loaded	R/WC	0b
	When set, this bit indicates that a valid EEPROM was found, and that the
	MAC address and SSVID/SSID programming have completed normally. This
	bit is set after a successful load of the MAC address and SSVID/SSID after
	power-up, or after a RELOAD command has completed.
7:0	EPC Address (EPC_ADDR)	R/W	00h
	The 8-bit value in this field is used by the EEPROM Controller to address
	the specific memory location in the Serial EEPROM.
	This is a Byte aligned address.

SMSC LAN9420/LAN9420i	101	Revision 1.22 (09-25-08)
	DATASHEET