11CentreWare Internet Services

Auto Eject Time

Adobe Communication Protocol (Only available when the optional PostScript Kit is installed.)

5.Select [Apply New Settings] to reflect the new setting.

6.Enter the user ID and password then select [OK].

NOTE: The default user ID is "11111" and the default password is "x-admin".

7.When the reboot message appears, select [Reboot].

NOTE: For more information about the contents of items, refer to the CentreWare Internet Services chapter of the User Guide.

EtherTalk

This is only displayed when PostScript Kit is installed. This page allows you to configure the EtherTalk settings.

NOTE: Some settings on this page will only be available after you restart CentreWare Internet Services, or after the machine is switched off and on.

1.At the CentreWare Internet Services home page for the machine, select the [Properties] tab.

2.In the [Properties] frame, select the plus symbol [+] to the left of the [Protocol Settings] folder.

3.Select [EtherTalk].

4.Set up the following options to be displayed in the frame.

Printer Name

Zone Name

5.Select [Apply New Settings] to reflect the new setting.

6.Enter the user ID and password then select [OK].

NOTE: The default user ID is "11111" and the default password is "x-admin".

7.When the reboot message appears, select [Reboot].

NOTE: For more information about the contents of items, refer to the CentreWare Internet Services chapter of the User Guide.

SMB (Microsoft Networking)

This page allows you to configure the SMB settings for the following options.

NOTE: Some settings on this page will only be available after you restart CentreWare Internet Services, or after the machine is switched off and on.

1.At the CentreWare Internet Services home page for the machine, select the [Properties] tab.

104

Xerox CopyCentre/WorkCentre/WorkCentre Pro 123/128 System Administration Guide

Page 104
Image 104
Xerox C123/C128 M123/M128 123/128 manual EtherTalk, SMB Microsoft Networking