Xerox C123/C128 M123/M128 123/128 manual Solaris

UNIX TCP/IP Installation

NOTE: To print an ASCII-format PostScript file, specify PSASC for data processing with TBCP enabled.

NOTE: To print a binary-format PostScript file, specify PSBIN for data processing with TBCP disabled.

NOTE: When specifying PS, the machine functions as if PSBIN is specified.

NOTE: You cannot use -C option when specifying the printer name with the output parameter.

NOTE: For details about -C option, refer to -C Option on page 61.

NOTE: Lowercase characters can also be used for a printer name.

NOTE: Up to 64 characters can be used for a printer name.

NOTE: Output parameters in the print data take priority over the printer name.

Solaris

Follow the steps below to set up a Solaris workstation to communicate with the machine.

1.Log in as root at a client workstation.

2.Use the Solaris ADMINTOOL to add the machine to the system host files. NOTE: Refer to the Solaris documentation for instructions on using the ADMINTOOL.

1)Select [Browse].

2)Select [Printers].

3)Select [Edit].

4)Select [Add].

5)Select [Local Printer].

6)Enter the [Host Name] in the Printer Name field and then select [OK].

7)Select [File].

8)Select [Exit].

3.Verify connectivity to the machine, by using a UNIX command such as ping, as shown in the following example:

ping PrinterName

PrinterName is alive

NOTE: The remote queue name must be set to lp to spool jobs to the machine.

Xerox CopyCentre/WorkCentre/WorkCentre Pro 123/128 System Administration Guide 51