Xerox C123/C128 M123/M128 123/128 manual Remote Authentication Network Communication Setup

Models: C123/C128 M123/M128 123/128

1 168
Download 168 pages 7.31 Kb
Page 134
Image 134

13 Scanning Services

When using Scan to FTP/SMB, Kerberos authentication has the following affect on the feature:

1.Selects [Scan to FTP/SMB].

2.A login/password popup will be displayed to authenticate users with the Kerberos server. Enters the login and password.

The login and password is passed on to the Kerberos server and if a match is found the user is successfully authenticated.

The user needs to enter a valid login and password for the FTP/SMB server. This may or may not be the user’s Kerberos login/password, rather it is a login/password that is accepted by the FTP/SMB server.

When using Network Scanning, Kerberos authentication has the following affect on the feature:

1.Selects [Network Scanning].

2.A login/password popup will be displayed to authenticate users with the Kerberos server. Enter the login and password.

The login and password is passed on to the Kerberos server and if a match is found the user is successfully authenticated.

Through the templates/repositories, the users will enter a valid login/password for FTP/ SMB servers. This may or may not be the user login/password; rather it is a login/ password that is accepted by the FTP/SMB server.

Public templates are accessible to any user. Private templates require a password that may or may not be different from the Kerberos password.

Remote Authentication Network Communication Setup

1.Connect the machine to the network.

2.Display the [System Settings] screen.

3.Select [Network Settings]

4.Select [Remote Authentication Server Settings]

5.Select [Authentication System], then select [Change Settings] and choose Kerberos 2000 or Kerberos Solaris.

6.Select [Remote Server Setup], then select [Change Settings] and choose to enter an IP address or Server Name.

7.Select [Remote Server IP Address], then enter the IP address of the Kerberos server.

8.Select [Remote Server Name], then enter the name of the server. DNS information needs to be populated through Internet services.

9.Select [Remote Server Port Number] and enter the port number. The default is Port 88.

134

Xerox CopyCentre/WorkCentre/WorkCentre Pro 123/128 System Administration Guide

Page 134
Image 134
Xerox C123/C128 M123/M128 123/128 manual Remote Authentication Network Communication Setup