![](/images/new-backgrounds/1185735/185735159x1.webp)
7 TCP/IP (LPD or Port9100)
TCP/IP (LPD or Port9100) Environments
System configuration
As the machine supports the LPD and Port9100 protocol, you can print directly from a Windows computer.
When printing from Windows 95/Windows 98/Windows Me computers through the LPD port, use our TCP/IP Direct Print Utility. This tool is installed together with the print drivers. When printing from Windows NT4.0/Windows 2000/Windows XP/Windows Server 2003 computers, use the OS standard LPR port.
When printing through Port9100, change the necessary settings on the computers. The transport protocol for LPD and Port9100 can be TCP/IP.
You will also need to set up the IP address on the machine and the Windows computers.
NOTE: Windows NT 4.0 does not support printing through Port9100.
Target computers
The following computers support printing through LPD or Port9100.
Connection | OS | Protocol |
|
|
|
|
|
|
LPD port | Windows 95 | TCP/IP |
| Windows 98 |
|
| Windows Me |
|
| Windows NT 4.0 |
|
| Windows 2000 |
|
| Windows XP |
|
| Windows Server 2003 |
|
| Mac OS X |
|
|
|
|
Port9100 | Windows 2000 | TCP/IP |
| Windows XP |
|
| Windows Server 2003 |
|
|
|
|
NOTE: The optional PostScript Kit is required when you print from Macintosh.
TCP/IP (LPD or Port9100) Installation
This section describes how to set up the machine to use the LPD and Port9100 protocol.
Installation Procedure
There are three stages to enable printing to the machine through LPD or Port9100.
80 | Xerox CopyCentre/WorkCentre/WorkCentre Pro 123/128 System Administration Guide |