Xerox C123/C128 M123/M128 123/128 manual System Settings, Changing the Settings

		System Settings
	Button	Function
12	<*(asterisk)>	Indicates the special character used in a fax number and
		designates a group code. Also allows you to specify an F Code or a
		password.
13	<All Services>	Displays the [All Services] screen for selection of all the available
		services on the machine.

Button names and icons used on the control panel may differ depending on the country of purchase.

System Settings

During manufacture this machine is pre-programmed with default settings which can be customized using the System Settings. The System Settings can be accessed via the <Log In/Out> button. The following set up categories are available.

•Common Settings

•Copy Settings

•Network Mode Settings

•Print Mode Settings

•Scan Mode Settings

•Fax Mode Settings

•E-mail/iFax Settings

•Mailbox Settings

•Application Communication Settings

NOTE: CentreWare Internet Services is software that enables you to display, configure and change the settings of the machine by using a browser on a computer instead of the machine's control panel. For more information, refer to the CentreWare Internet Service chapter of the User Guide.

Changing the Settings

User ID and password are required to change the settings. The default user ID and password for the System Administrator are "11111" and "x-admin" respectively. It allows you to access the System Settings described in this chapter.

NOTE: You are advised to change the password from the default one. For further assistance, contact your Xerox Welcome Center.

Follow these steps to change the default settings:

Xerox CopyCentre/WorkCentre/WorkCentre Pro 123/128 System Administration Guide 33