3 NetWare
This chapter explains how to install the machine onto a NetWare network. The following information is provided.
Information Checklist – page 41
NetWare Environments – page 42
NetWare Installation – page 43
Installation Procedure – page 43
Network Communication Setup – page 43
NetWare Setup – page 44
Workstation Setup – page 45
Test Print – page 45
Information Checklist
Before installing the machine onto a network, make sure that the following items are available or have been performed.
| Item | By |
|
| |
|
| |
An existing operational NetWare network is required. These procedures | Customer | |
are not designed to install a NetWare network. |
| |
|
| |
NetWare versions 3.x, 4.x, 5.x or 6.x. | Customer | |
|
| |
Obtain and record the following information, if required: | Customer | |
• | IP address |
|
• | Gateway address |
|
• | Subnet mask |
|
• | Host name |
|
Refer to the glossary for additional information about the Gateway |
| |
Address and Subnet mask, if needed. |
| |
|
| |
Test the machine to make sure that it is installed fully and functioning | Customer | |
correctly. |
| |
|
| |
Install the print driver. | Customer | |
|
|
|
If problems arise during the machine installation, refer to the Problem Solving chapter for assistance.
CAUTION: Do not connect the network cable to the machine until instructed to do so.
Xerox CopyCentre/WorkCentre/WorkCentre Pro 123/128 System Administration Guide | 41 |
