SMB Installation | Xerox C123/C128 M123/M128 123/128 specs

SMB Installation

SMB Installation

This section describes the installation procedure for using the machine on an SMB network.

Installation Procedure

The installation procedure is as follows.

Network Communication Setup

When using NetBEUI:

Set the SMB port to [Enabled] using the touch screen or CentreWare Internet Services.

When using TCP/IP:

Set the SMB port to [Enabled] using the touch screen or CentreWare Internet Services. Set the IP address on the control panel.

Workstation Setup

Install the print driver on the computer.

Test Print

A print job should be submitted to make sure that the machine has been installed and configured correctly.

Network Communication Setup

This procedure is used to set up the network communication parameters of the machine.

At the machine, perform these steps.

NOTE: Keep the SNMP port enabled while you use the machine on the TCP/IP network.

NOTE: CentreWare Internet Services can also be used to configure the machine. Refer to the CentreWare Internet Services chapter of the User Guide.

Initially, boot the SMB port.

1.Connect the machine to the network.

2.Display the [System Settings] screen.

NOTE: For more information about how to display the [System Settings] screen, refer to the Setups chapter of the User Guide.

3.Select [Network Settings].

4.Select [Port Settings].

Xerox CopyCentre/WorkCentre/WorkCentre Pro 123/128 System Administration Guide

73

Image 73

Xerox C123/C128 M123/M128 123/128 manual SMB Installation, Installation Procedure

Contents

ME3243E4-1 System Administration Guide AL7 1HE England Table of Contents Microsoft Networking EtherTalk Network Communication Setup 123 115 145 139163 167Page Xerox Welcome Center Before Using the Machine Conventions Key Operator/System AdministratorOrientation Long Edge Feed LEF Text in Angle Brackets Text in Square BracketsItalic Typeface Related Information Sources Machine Components Product Overview Duplex Module FinisherPaper Trays 3 Copy Services and FeaturesMail Fax/Internet Fax Powering On Power On/Off Cabling Powering OffInterface Ports Ethernet 10BASE-T/100BASE-TX ModesParallel Ieee 1284 Host Connection USB 2.0 Universal Serial Bus Features All Services Current and Pending Jobs Job StatusDoc. No. Job Type Status Remote Terminal/ContentsProgress Job Screen Stored Documents Completed JobsCharge Print Secure Print Sample Print Delayed Print Public Mailbox Machine Status Machine Information Machine StatusPaper Tray Fax Receiving Mode Print ModeOverwrite Hard Disk Billing Meter Billing Meter/Print ReportUser Account Billing Meter Print Report/List Product Overview Consumables Faults Button Function System Controls Changing the Settings System Settings Select Confirm on the System Administrator Login screen Ethernet Port PCL Resident Fonts Resident Fonts Value Description Code Value Short Display Long Display Symbol Set Code Value Short Display Long Display Page NetWare Information Checklist NetWare Environments System configurationTarget computers IPX/SPX frame types Installation Procedure NetWare InstallationNetwork Communication Setup NetWare Setup Test Print Workstation SetupPage Unix TCP/IP Unix TCP/IP Environments Unix TCP/IP InstallationInterface Unix TCP/IP Installation Printer Name Print Language/Mode/Logical Printer Print language/mode/logical printer Solaris IP address tab PrinterName SunOS HP-UX Using the Command Window TTY Method Using the System Administrator Manager SAM GUI Method Command options Command formatPrinting Solaris/HP-UX Example Delete cancel Print lpr SunOS Lpr -PfxPS -#3 file1 file2 Delete lprm %lpstat -uuser1,user2,user3 Printer name Printer Status User name Function OptionExamples Selecting a paper tray Selecting a paper output tray Specifying double-sided printing Selecting a paper typeSpecifying paper size and double-sided printing Specifying color and print modes Specifying collation Specifying stapling Printing Lpr -PfxPS -C,DUP,A4 file1 EtherTalk EtherTalk Environments EtherTalk Installation EtherTalk Installation Workstation Setup Microsoft Networking Connection Protocol SMB Environments SMB Installation Microsoft Networking Procedure Changing the Settings Remarks Value Default Setting Format of config.txt JCL Available only when PostScript Kit optional is installed TCP/IP LPD or Port9100 TCP/IP LPD or Port9100 Environments TCP/IP LPD or Port9100 Installation Workstation Setup Network Communication SetupTest Print Workstation Setup Test Print Page Parallel Port Parallel Port Communication Setup Parallel Port InstallationParallel Port Communication Setup Parallel Port Environment PJL Test Print USB Port USB Port Communication Setup USB Port InstallationUSB Port Environment USB Port Communication Setup Test Print IPP Internet Printing Protocol IPP Environment IPP Installation IPP Installation Workstation Setup CentreWare Internet Services User ID and Password CentreWare Internet Services EnvironmentsBrowsers Test Access CentreWare Internet Services Installation Test Access Snmp UDP, IPX Selecting Transport Protocols Ethernet USB Parallel SMB Microsoft Networking EtherTalk NetWare TCP/IP Snmp LPD and Port9100 IPP Mail CentreWare Internet Services UPnP Http Ssdp When the reboot message appears, select Reboot Page Mail Overview MailInternet Fax iFax Scan to E-mail Mail Print Notify Job End by E-mail Mail Notice Service Correspondent Specifications Mail InstallationMail Environments System Requirements Test Mail Mail Setting Setup Scan to E-mail Test Mail Mail Installation Page Scanning Overview Scanning Services Scanning Process Scanning with the machineScan to E-mail Scan to Mailbox Scan using Template Network Scanning Information Checklist Scan to Mailbox SetupScan to FTP/SMB Network Scan to Mailbox Environments Scan to Mailbox Setup FTP server Scan using Template Network Scanning Setup Scan using Template Network Scanning Setup Scan using Template Environments Scanning Services Information Checklist Remote Authentication Setup If Required Remote Authentication Network Communication Setup Remote Authentication Enablement Scan to FTP/SMB Environments Scan to FTP/SMB Setup Create a shared folder on your computer Workstation Setup IFax Overview Internet Fax IFax Environments IFax Installation Test iFax Internet Fax IFax Installation Test iFax Problem Solving Procedures Problem Solving When printing fails Problems using a NetWare EnvironmentCause Confirmation Method Action Problems using a NetWare Environment NetWare5 server in the same Cause Confirmation Method Action When the required printing result is not obtained When a switch off/on message is displayed When there is no notification of error Problems using an SMB EnvironmentWhen there is no notification of the completion of the job When the machine is not found from client computers When the document cannot be deleted from the printer window Problems using a Unix Environment When printing fails When using Windows 95/Windows 98/Windows Me Problems using a Windows EnvironmentWhen printing fails When printing fails Cause Confirmation Method Action When the required printing result is not obtained Cause Problems using EtherTalk Cause Confirmation Method Action Problems using CentreWare Internet Services Problems using E-mail Print/Mail Notice Service/iFax Cause Confirmation Method Action Terms Defined Glossary Glossary PCL Rarp Index Index