Xerox C123/C128 M123/M128 123/128 manual Unix TCP/IP Installation

Models: C123/C128 M123/M128 123/128

1 168
Download 168 pages 7.31 Kb
Page 49
Image 49

UNIX TCP/IP Installation

Network Communication Setup

Use this procedure to set up the network communication parameters of the machine.

NOTE: Keep the SNMP port enabled while you use the machine on the TCP/IP network.

NOTE: CentreWare Internet Services can also be used to configure the machine. Refer to the CentreWare Internet Services chapter of the User Guide.

Follow the steps below to establish TCP/IP.

1.Connect the machine to the network.

2.Display the [System Settings] screen.

NOTE: For more information about how to display the [System Settings] screen, refer to the Setups chapter of the User Guide.

3.Select [Network Settings].

4.Select [Protocol Settings].

5.Select [TCP/IP – Get IP Address] and [Change Settings].

6.Select a method for establishing an IP address from [DHCP], [BOOTP], [RARP], [DHCP/Autonet], or [Manual], and then select [Save].

NOTE: Use the DHCP server together with the Windows Internet Name Server (WINS) server.

If you selected [Manual] in step 6, then complete steps 7 to 12 to enter the [Protocol Settings]. Otherwise, complete step 15.

7.Select [TCP/IP – IP Address], and then [Change Settings].

8.Use the keypad on the screen to enter the IP Address for the machine in the format “XXX.XXX.XXX.XXX”. Enter relevant values (0 to 255) into the highlighted field and select [Next]. The next 3 digits are highlighted. When you have finished entering all values, select [Save].

9.Select [TCP/IP – Subnet Mask], and then [Change Settings].

10.Using the same method as in step 8, enter the Subnet Mask.

11.Select [TCP/IP – Gateway Address], and then [Change Settings].

12.Using the same method as in step 8, enter the Gateway Address.

NOTE: If you do not wish to set the Gateway Address, enter “0.0.0.0”.

13.Select [TCP/IP - IP Filter], then [Change Settings].

14.Select [On] to filter access to the machine.

NOTE: If you do not wish to use the IP filter feature, select [Off].

NOTE: Use CentreWare Internet Services to register the IP addresses which are not allowed to access the machine. Refer to the CentreWare Internet Services chapter of the User Guide.

Xerox CopyCentre/WorkCentre/WorkCentre Pro 123/128 System Administration Guide

49

Page 49
Image 49
Xerox C123/C128 M123/M128 123/128 manual Unix TCP/IP Installation