|
| |
|
|
|
| Parameter | Description |
|
|
|
|
|
|
| CB/cb | Selects color for color mode and speed priority for print mode. |
|
|
|
| GC/gc | Selects monochrome for color mode and quality priority for print mode. |
|
|
|
| GB/gb | Selects monochrome for color mode and speed priority for print mode. |
|
|
|
| AC/ac | Selects auto (color/monochrome) for color mode and quality priority for |
|
| print mode. |
|
|
|
| AB/ab | Selects auto (color/monochrome) for color mode and speed priority for |
|
| print mode. |
|
|
|
NOTE: The color setting is not available on the machine.
NOTE: If several parameters are specified in the first lpr command, data may not print.
NOTE: For some print languages, the color parameter may be invalid.
NOTE: The system default is used if no parameter is specified.
Specifying stapling
The following parameters can be specified for stapling.
Parameter | Description |
|
|
|
|
STAPLETL | Places one staple in the upper left corner of the prints. |
|
|
STAPLETD | Places two staples at the top of the prints. |
|
|
STAPLETR | Places one staple in the upper right corner of the prints. |
|
|
STAPLELD | Places two staples on the left side of the prints. |
|
|
STAPLERD | Places two staples on the right side of the prints. |
|
|
STAPLEBL | Places one staple in the lower left corner of the prints. |
|
|
STAPLEBD | Places two staples at the bottom of the prints. |
|
|
STAPLEBR | Places one staple in the lower right corner of the prints. |
|
|
NOTE: If several parameters are specified in the first lpr command, data may not print.
NOTE: For some print languages, the stapling parameter may be invalid.
Printing
To specify the output format of printing, enter the following command:
-C,[parameter],[parameter]
Enter a “,” (comma) after
Xerox CopyCentre/WorkCentre/WorkCentre Pro 123/128 System Administration Guide | 65 |