Xerox C123/C128 M123/M128 123/128 manual Selecting a paper type, Specifying double-sided printing

-C Option

Selecting a paper type

The following parameters can be specified.

Parameter	Description
PTS/pts	Selects plain paper.
PT1/pt1	Selects thick paper 1.
PT2/pt2	Selects thick paper 2.
POH/poh	Selects transparency.
PTP/ptp	Selects tracing paper.
PLB/plb	Selects labels.
PQU/pqu	Selects bond paper.
PRC/prc	Selects recycled paper.

Specifying double-sided printing

The following parameters can be specified.

Parameter	Description
DUP/dup	Double-sided printing as follows: A B
TUMBLE/tumble	Double-sided printing as follows:
	A B
	C D
SIMP/simp	Single-sided printing

NOTE: If several parameters are specified in an lpr command, data may not print correctly.

NOTE: The system default is used if no parameter is specified.

NOTE: If the print data specifies double-sided or single-sided printing, those specifications take priority over any -C option.

Specifying paper size and double-sided printing

Select a paper size and a binding option. The following parameters can be specified:

Parameter	Description
A3D/a3d	Double-sided printing on A3 (297 × 420 mm/11.7 × 16.5
	inches) paper and long-edge binding

Xerox CopyCentre/WorkCentre/WorkCentre Pro 123/128 System Administration Guide 63