Chapter 4 - Operation and Administration
Before transmitting the frames to the Ethernet port, the Service Provider VLAN ID tag is removed.
The Service Provider VLAN ID affects frames received from the Ethernet link port, as follows: A Service Provider tag, that includes the configured Service Provider VLAN ID (and the VLAN QinQ Ethertype) is inserted in all frames, both tagged and untagged, before transmission to the wireless link.
4.2.6.4.1.7 VLAN Traffic Priority
The VLAN Traffic Priority menu enables configuring the VLAN Priority field in applicable frames. These parameters only impact the way in which other VLAN aware devices in the network will handle the packet. All parameters that affect prioritization within the BreezeACCES VL system, including
The VLAN Traffic Priority menu includes the following parameters:
VLAN Priority – Data (SU only)
VLAN Priority – Management
4.2.6.4.1.7.1VLAN Priority - Data (SU only)
The VLAN Priority - Data is applicable for Access Links only. It enables configuring the value of the VLAN Priority field for data frames transmitted to the wireless link. All data frames are routed to the Low queue. This parameter only impacts the way other VLAN aware devices handle the packet.
Valid values range from 0 to 7.
The default value is 0.
4.2.6.4.1.7.2VLAN Priority - Management
The VLAN Priority - Management enables defining the value of the VLAN Priority field for management frames in units with VLAN
Valid values range from 0 to 7.
The default value is 4 for SUs and 0 for AUs.
4.2.6.4.1.8 VLAN QinQ Protocol Ethertype
The VLAN QinQ Proptocol Ethertype parameter sets the Ethertype of the Service Provider tag, and is applicable only for Service Provider Links.
The valid values are from 8100 to 9000, 9100 and 9200 (Hex).
BreezeACCESS VL System Manual
176
