Chapter 1 - System Description

 

Table 1-5: SU-A/E Subscriber Unit Types

 

 

 

SU Type

 

Description

SU-54-BD (SU-54)

 

A high-rate CPE that supports a full LAN. Not available in

 

 

the 900 MHz band.

 

 

 

SU-6-BD (SU-6)

 

A medium rate CPE that supports a full LAN*. Not available

 

 

in the 900 MHz band.

 

 

 

SU-3-BD (SU-3)

 

An entry level CPE that supports a full LAN**

 

 

 

SU-8-BD (SU-8)

 

A medium rate CPE that supports a full LAN. Available only

 

 

in the 900 MHz band. The SU-8 functionality is available by

 

 

loading the relevant feature license to an SU-3 unit.

 

 

 

 

 

 

*In the past, SU-6-1D units were also available. After being upgraded to version 5.0, SU-6-1D units will automatically be changed to SU-6-BD units.

**In the past, only SU-3-1D and SU-3-4D were available. After being upgraded to version 5.0, SU-3-1D/4D units will automatically be changed to SU-3-BD units. (In SNMP, these units will be reported as SU-3-4D. However, all SU-3 units running SW version 5.0 or higher will behave as SU-3-BD units, supporting a full LAN).

The IDU provides the interface to the user’s equipment and is powered from the 110/220 VAC mains. The customer's data equipment is connected via a standard IEEE 802.3 Ethernet 10/100BaseT (RJ 45) interface. The indoor unit is connected to the outdoor unit via a Category 5 Ethernet cable. This cable carries Ethernet traffic between the indoor and the outdoor units, and also transfers power (54 VDC) and control from the indoor unit to the outdoor unit.

10

BreezeACCESS VL System Manual

Page 42
Image 42
Alvarion SW VERSION 5.1 system manual SU-A/E Subscriber Unit Types, SU Type Description