Chapter 2 - Installation

2.6.4BS-AU Network Interface Module

Figure 2-22 shows the front panel of the BS-AU Access Unit Network Interface module.

Figure 2-22: BS-AU Front Panel

The BS-AU provides the following interfaces:

„10/100 BaseT: A 10/100BaseT Ethernet connector for connecting the BS-AU to the network. A straight Ethernet cable should be used to connect the module to a hub, router or switch.

„RADIO: A 10/100BaseT Ethernet connector for connecting the BS-AU to an AU-ODU outdoor unit.

CAUTION

Do not connect the data equipment to the RADIO port. The RADIO port supplies DC power to the ODU, and this may harm other equipment connected to it.

The recessed RESET switch on the front panel is for resetting the outdoor unit.

66

BreezeACCESS VL System Manual

Page 98
Image 98
Alvarion SW VERSION 5.1 system manual BS-AU Network Interface Module, BS-AU Front Panel