Chapter 4 - Operation and Administration
Internally discarded MIR\CIR: The number of data frames received from the Ethernet port that were discarded by the MIR/CIR mechanism to avoid exceeding the maximum permitted information rate.
4.2.5.2Ping Test
The Ping Test submenu is used to control pinging from the unit and includes the following options:
Destination IP Address: The destination IP address of the device being pinged. The default IP address is 192.0.0.1.
Number of Pings to Send: The number of ping attempts per session. The available range is from 0 to 9999. The default value is 1. Select 0 for continuous pinging.
Ping Frame Length: The ping packet size. The available range is from 60 to 1472 bytes. The default value is 64 bytes.
Ping Frame Timeout: The ping frame timeout, which is the amount of time (in ms) between ping attempts. The available range is from 100 to 60,000 ms. The default value is 200 ms.
Start Sending: Starts the transmission of ping frames.
Stop Sending: Stops the transmission of ping frames. The test is automatically ended when the number of pings has reached the value specified in the No. of Pings parameter, described above. The Stop Sending option can be used to end the test before completing the specified number of pings, or if continuous pinging is selected.
Show Ping Test Values: Displays the current values of the ping test parameters, the transmission status, which means whether it is currently sending or not sending pings, the number of pings sent, and the number of pings received, which means the number of acknowledged frames.
4.2.5.3Link Quality (SU only)
The Link Quality submenu enables viewing continuously updated information on the quality of the wireless link. The Link quality submenu includes the following options:
BreezeACCESS VL System Manual
118
