Alvarion SW VERSION 5.1 Log Out Timer, Ethernet Negotiation Mode, Change System Location

Chapter 4 - Operation and Administration

The parameters configured in the unit are not changed as a result of loading new software versions unless the new version includes additional parameters or additional changes in the list of parameters. New parameters are loaded with their default values.

Select from the following options:

„Reset and Boot from Shadow Version: Activates the shadow (backup) software version. The unit is reset automatically. Following the next reset the unit will switch to the main version.

„Use Running Version After Reset: Defines the current running version as the new main version. This version will also be used following the next reset.

4.2.3.6Log Out Timer

The Log Out Timer parameter determines the amount of inactive time following which the unit automatically exits the Monitor program.

The time out duration can range from 1 to 999 minutes.

The default value is 5 minutes.

4.2.3.7Ethernet Negotiation Mode

The Ethernet Port Negotiation Mode submenu displays the current Ethernet port state and enables defining the negotiation mode of the Ethernet port. The available options are:

„Force 10 Mbps and Half-Duplex

„Force 10 Mbps and Full-Duplex

„Force 100 Mbps and Half-Duplex

„Force 100 Mbps and Full-Duplex

„Auto Negotiation (10/100 Mbps and Half/Full Duplex)

The default is Auto Negotiation (10/100 Mbps and Half/Full Duplex)

4.2.3.8Change System Location

The Change System Location option enables changing the system location of the unit, which is also the sys location in MIB2. The System Location is also displayed as a part of the Monitor menu’s header.

Valid values: A string of up to 35 printable ASCII characters.

BreezeACCESS VL System Manual

104