Alvarion SW VERSION 5.1 system manual IP Parameters, Air Interface Parameters, Default Run-Time

Parameters Summary

E.1.2 IP Parameters

Parameter	Unit		Range
IP Address	AU, SU	IP address
Subnet Mask	AU, SU	IP address
Default Gateway Address	AU, SU	IP address
DHCP Option	AU, SU	„	Disable
		„	DHCP Only
		„	Automatic
Access to DHCP	AU, SU	„	From Wireless Only
		„	From Ethernet Only
		„ From Both Wireless and
			Ethernet

Default	Run-Time
10.0.0.1	No
255.0.0.0	No
0.0.0.0	No
Disable	No
AU: From Ethernet Only
	No
SU: From Wireless Only

E.1.3 Air Interface Parameters

Parameter	Unit		Range		Default	Run-Time
ESSID	AU, SU	Up to 31 printable ASCII			ESSID1	No
		characters			Enable
Operator ESSID Option	AU	„	Disable			No
		„	Enable
					ESSID1
Operator ESSID	AU	Up to 31 printable ASCII				No
		characters			Disable
Best AU Support	SU	„	Disable			No
		„	Enable
				4
Number of Scanning	SU	1 – 255				No
Attempts				00-00-00-00-00-00
Preferred AU MAC	SU	MAC Address				No
Address					(no preferred AU)
Scanning Mode	SU	Passive, Active			Passive	No
Cell Distance Mode	AU	Automatic, Manual			Automatic	No
Maximum Cell Distance	AU	0-54 (Km)			0 (no compensation)	Yes
		0 means no compensation
				100 (%)
Fairness Factor	AU	0 – 100 (%)				No
Per SU Distance	AU	„	Disable		Disable	Yes
Learning		„	Enable
					2 time slots
Arbitration Inter-Frame	AU, SU	1-50 (time slots)				No
Spacing				30 (%)
Wireless Trap Threshold	AU	1-100 (%)				No
Maximum Number of	AU	AU-BS, AU-SA: 1-512 (1-124 if			AU-BS, AU-SA: 512	Yes
Associations		Data Encryption Option is			AUS-BS, AUS-SA: 8
		enabled).
		AUS-BS, AUS-SA: 1-8		1
Sub-Band Select*	AU	According to the Country Code				Yes
Frequency	AU	According to the Sub-Band			The lowest frequency in	Yes
					the Sub-Band
					All available frequencies
User Defined Frequency	SU	All frequencies in the available				Yes
Subsets		Sub Bands			in all available Sub
					Bands

BreezeACCESS VL System Manual

227